Home & garden irrigation
Get an irrigation system designed for your garden
Tell us about your garden and water supply, and our team will design a watering system to suit it – then send you a ready-made basket of every part you need, so you can check out in one click.
How it works
From garden plan to doorstep
Tell us about your garden
Fill in the form below with your water supply readings, a measured drawing and a few photos.
We design your system
Our garden irrigation specialist works out the right mix of drip, micro and sprinkler watering for each area.
Get your curated basket
We email you a design summary and a secure link to a basket of every part you need – pipe, fittings, emitters and timer.
Check out & install
Review the basket, check out in one click, and we'll dispatch it. We're on hand if you have questions while you fit it.
Before you start
What we need from you
The more accurate your information, the better your design. It only takes about 30 minutes – here's what to gather before filling in the form.
1. Measure your water pressure
Screw a pressure gauge onto your outside tap, turn the tap fully on and note the reading in bar. If you're using a pump, the pressure is listed in its manual or on its label.
2. Measure your flow rate
Turn your tap fully on and time how long it takes to fill a bucket of known size. Flow (litres/min) = litres ÷ seconds × 60. Use the calculator below to do the maths.
3. Sketch & measure your garden
Draw your house, boundaries, paths, patios, sheds and greenhouses, then mark lawns, borders, beds, trees, pots and hanging baskets. Measure everything with a tape and mark where your tap or water butt is.
4. Make a scale drawing & take photos
Redraw your sketch on graph paper to a scale such as 1 cm = 1 m, and shade the areas you want watered. Then take a few photos of the garden and your water source – you'll upload both with the form.
Flow rate calculator
Turn your tap fully on, time how long it takes to fill a bucket, and enter the numbers below.
Request your design
Tell us about your garden
Upload your garden drawing and a few photos, and we'll be in touch with your design and a curated basket of parts.
Frequently asked questions
Why do I need a design?
Every garden and water supply is different. A design makes sure the system you buy works with your pressure and flow, waters every area evenly and doesn't leave you with parts you don't need.
Do I have to measure pressure and flow?
For the best design, yes. If you can't, give us as much detail as you can about your water source and we'll advise on what we can.
Can I guess my garden measurements?
Please don't – pipe lengths, fittings and the number of emitters are all worked out from your drawing, so accurate measurements mean an accurate basket.
How will I receive my basket?
We'll email you a secure checkout link with all the parts already added. You can review it, ask us to change anything, and pay online when you're happy.
Do you install systems?
Our garden kits are designed for straightforward DIY fitting. If you'd like help with installation, mention it on the form and we'll talk you through the options.
Prefer to talk it through?
Call our team on 01304 849205 – we're happy to help.